أ.د. زياد مسعود
أ.د. زياد مسعود
سيرة شخصية
الأستاذ الدكتور زياد مسعود حاصل على درجة الدكتوراه في الهندسة الميكانيكية من جامعة فرجينيا تك (Virginia Tech)، فيرجينيا، الولايات المتحدة الأمريكية في عام 2000 تشمل اهتماماته البحثية الحالية أنظمة التحكم غير التقليدية للرافعات، والتحكم في الاهتزاز للأنظمة متعددة حرية الحركة، وتصميم ناقل الحركة المتغير الغير محدود للمركبات الهجينة.
الخلفية التعليمية
الدكتوراة، ميكانيكا هندسة ، فرجينيا تك ، الولايات المتحدة الأمريكية
ماجستير، هندسة ميكانيكية ، الجامعة الأردنية ، عمان - الأردن
بكالوريوس، هندسة ميكانيكية ، جامعة قاريونس ، ليبيا
ماجستير، هندسة ميكانيكية ، الجامعة الأردنية ، عمان - الأردن
بكالوريوس، هندسة ميكانيكية ، جامعة قاريونس ، ليبيا
الاهتمامات البحثية
-
التحكم في الاهتزاز للأنظمة متعددة حرية الحركة.
-
ديناميكا الأجسام المتعددة، الديناميكا الخطية وغير الخطية، الاهتزازات الميكانيكية.
-
التحكم غير التقليدي والتحكم الرقمي والتحكم الخطي وغير الخطي للأنظمة الميكانيكية.
-
النمذجة غير الخطية والتحكم في الرافعات التجارية.
-
أنظمة التحكم في الاهتزازات الخطية وغير الخطية.
الخبرات
-
10/2021 – حتى تاريخه عميد الدراسات العليا في الجامعة الألمانية الأردنية.
-
10/2017 – 10/2019 عميد الدراسات العليا والبحث العلمي في الجامعة الألمانية الأردنية.
-
8/2016 أستاذ دكتور في قسم الهندسة الميكانيكية، كلية العلوم التقنية التطبيقية، الجامعة الألمانية الأردنية.
-
3/2016 – 8/2016 أستاذ مشارك، قسم هندسة الميكاترونكس، كلية العلوم التقنية التطبيقية، الجامعة الألمانية الأردنية.
-
3/2012 – 3/2016 عميد كلية العلوم التقنية التطبيقية، الجامعة الألمانية الأردنية.
-
1/2011 – 3/2012 نائب عميد كلية العلوم التقنية التطبيقية الجامعة الألمانية الأردنية.
-
9/2009 – 9/2010 رئيس قسم الهندسة الميكانيكية / الجامعة الهاشمية.
-
11/2008 – 9/2009 أستاذ مشارك، قسم الهندسة الميكانيكية، الجامعة الهاشمية.
-
9/2006 – 11/2008 أستاذ مساعد، قسم الهندسة الميكانيكية، الجامعة الهاشمية.
-
8/2005 – 8/2006 مدير قسم البحث والتطوير، SuperDyn، LLC، بلاكسبرج، فيرجينيا، الولايات المتحدة الأمريكية.
-
8/2001 – 8/2008 أستاذ مساعد، قسم العلوم الهندسية والميكانيكا، فرجينيا تك، الولايات المتحدة الأمريكية.
-
1/2001 – 7/2001 أستاذ مساعد زائر، قسم العلوم الهندسية والميكانيكا، فرجينيا تك، الولايات المتحدة الأمريكية
الجوائز
-
حصل على لقب "VT Scholar of the Week" من قبل نائب الرئيس للبحث العلمي، Virginia Tech، 11/2004
-
جائزة المؤسسة الوطنية للعلوم (NSF)، المعهد الصيفي لميكانيكا النانو والمواد، 2003
-
شهادة التميز في التدريس، جامعة فرجينيا تك، 2003
منشورات مختارة
| 2022 | Khaled A Alhazza, Ziyad N Masoud, Jassim A Alqabandi,"A close-form command shaping control for point-to-point maneuver with nonzero initial and final conditions,",Journal of Mechanical Systems and Signal Processing,2022 |
| 2022 | Sameer Arabasi , Ziyad Masoud,"Frequency-Modulation Input Shaping Strategy for Double-Pendulum Overhead Cranes Undergoing Simultaneous Hoist and Travel Maneuvers,",IEEE Access,2022 |
| 2017 | Ziyad N. Masoud, Khaled A. Alhazza,"A smooth multimode waveform command shaping control with selectable command length",Journal of Sound and Vibration,2017 |
| 2017 | Sameer Arabsi , Ziyad N. Masoud,"Simultaneous Travel and Hoist Maneuver Input Shaping Control Using Frequency Modulation",Shock and Vibration,2017 |
| 2016 | Ziyad N. Masoud, Khaled A. Alhazza,"Frequency-Modulation Input Shaping for Multimode Systems",Journal of Vibration and Control,2016 |
| 2016 | Khaled A. Alhazza, Ziyad N. Masoud, Nehal Alotaibi,"A Smooth Wave-Form Shaped Command with Flexible Maneuvering Time: Analysis and Experiments",Asian Journal of Control,2016 |
| 2016 | Khaled A. Alhazza, Ziyad N. Masoud,"Waveform Command Shaping Control of Multimode Systems,",Journal of Sound and Vibration,2016 |
| 2016 | Ziyad N. Masoud,"Multimode input shaping control of flexible structures using frequency-modulation",Jordan Journal of Mechanical and Industrial Engineering,2016 |
| 2016 | Ziyad N. Masoud, Khaled A. Alhazza, Mohammad Nazzal,"Multimode input shaping control of flexible structures using frequency modulation",International Design Engineering Technical Conferences & Computers and Information in Engineering Conference,2016 |
| 2015 | Khaled A. Alghanim, Khaled A. Alhazza, Ziyad N. Masoud,"A Discretized Optimization Strategy for Rest-to-Rest Maneuvers Considering the effect of Damping",ASME 2015 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference,2015 |
| 2015 | Khaled A. Alhazza, Ziyad N. Masoud, Abdulsalam Alhazza,"A Multimode Wave-Form Command Shaping Control Applied on A Double Pendulum",ASME 2015 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference,2015 |
| 2015 | Khaled A. Alhazza, Ziyad N. Masoud,"A Multi-Mode Smooth Command Shaper with an Adjustable Maneuver Time",,” ASME 2015 Dynamic Systems and Control Conference,2015 |
| 2015 | Khaled A. Alghanim, Khaled A. Alhazza, Ziyad N. Masoud,"Discrete-Time Command Profiles for Simultaneous Travel and Hoist Maneuvers of Overhead Cranes",Journal of Sound and Vibration,2015 |
| 2014 | K. A. Alhazza, A. M. Hassan, K. A. Alghanim, Z. N. Masoud,"An Iterative Learning Control Technique for Point-to-Point Maneuvers Applied on an Overhead Crane",Journal of Shock and Vibration,vol. 2014, Article ID 261509,2014 |
| 2014 | Khaled A. Alghanim, Khaled A. Alhazza, Ziyad N. Masoud,"A discretized Optimization Strategy for Rest-to-Rest Maneuvers Considering the effect of Damping",ASME 2014 International Mechanical Engineering Congress & Exposition,IMECE2014-37267,Montreal, Canada,2014 |
| 2014 | Ziyad N. Masoud, Khaled A. Alhazza, Eiyad A. Abu-Nada, Majed Majeed,"A Hybrid Command-Shaper for Double-Pendulum Overhead Cranes",Journal of Vibration and Control,Vol. 20, No. 1, 2014, pp. 24 – 37. ,2014 [View] |
| 2014 | Ziyad N. Masoud, Khaled A. Alhazza,"Frequency-Modulation Input Shaping Control of Double-Pendulum Overhead Cranes",ASME Journal of Dynamic Systems, Measurement and Control,136 (2), 2014, doi:10.1115/1.4025796,2014 [View] |
| 2014 | Ziyad N. Masoud, Khaled A. Alhazza,"A Hybrid Command-Shaper for Double-Pendulum Overhead Cranes",Journal of Vibration and Control,2014 |
| 2014 | Ziyad N. Masoud, Khaled A. Alhazza,"Frequency-Modulation Input Shaping Control of Double-Pendulum Overhead Cranes,",ASME Journal of Dynamic Systems,2014 |
| 2014 | K. A. Alhazza, A. M. Hassan, K. A. Alghanim, Z. N. Masoud,"An Iterative Learning Control Technique for Point-to-Point Maneuvers Applied on an Overhead Crane",Shock and Vibration,2014 |
| 2013 | Ziyad N. Masoud, Khaled A. Alhazza,"A Frequency-Modulation Command-Shaping Strategy for Multi-Mode Systems",ASME 2013 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference,2013 |
| 2013 | Khaled A. Alhazza, Ziyad N. Masoud, Nehal Alotaibi,"A Smooth Wave-Form Command Shaping Control",ASME 2013 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference,2013 |
| 2013 | Khaled A. Alhazza, Ziyad Masoud,"A Novel Wave-Form Command Shaper for Overhead Cranes",Journal of Engineering Research,Vol. 1, No. 3, 2013, pp. 181 – 209,2013 [View] |
| 2013 | Khaled A. Alhazza, Ziyad N. Masoud, Nehal Alotaibi,"A Smooth Wave-Form Command Shaping Control",ASME 2013 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference,DETC2013-12768,Portland, Oregon,2013 |
| 2013 | Ziyad N. Masoud, Khaled A. Alhazza,"A Frequency-Modulation Command-Shaping Strategy for Multi-Mode Systems",ASME 2013 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference,DETC2013-13355,Portland, Oregon,2013 |
| 2013 | Khaled A. Alhazza, Ziyad N. Masoud,"A Novel Wave-Form Command Shaper for Overhead Cranes",Journal of Engineering Research,2013 |
| 2012 | Khaled A. Alghanim, Khaled A. Alhazza, Ziyad N. Masoud,"A Novel Optimization Strategy for Command Shaping Control",IMAC XXX,Jacksonville, Florida,2012 |
| 2011 | Ziyad N. Masoud, Khaled A. Alhazza,"Command-Shaping Control System for Double-Pendulum Gantry Cranes",ASME 2011 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference,2011 |
| 2011 | Khaled A. Alhazza, Asmahan Al-Shehaima, Ziyad N. Masoud,"A Continuous Modulated Wave-Form Command-Shaping for Damped Overhead Cranes",ASME 2011 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference,2011 |
| 2011 | Ziyad N. Masoud, Khaled A. Alhazza,"Command-Shaping Control System for Double-Pendulum Gantry Cranes",ASME 2011 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference,DETC2011-48400,Washington, DC,2011 |
| 2011 | Khaled A. Alhazza, Asmahan Al-Shehaima, Ziyad N. Masoud,"A Continuous Modulated Wave-Form Command-Shaping for Damped Overhead Cranes",ASME 2011 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference,DETC2011-48336,Washington, DC,2011 |
| 2010 | Khaled A. Alhazza,"A Novel Wave-Form Command-Shaping Control with Application on Overhead Cranes",2010 ASME Dynamic Systems and Control Conference,2010 |
| 2010 | Eiyad Abu-Nada, Ziyad Masoud, Hakan Oztop, Antonio Campo,"Effect of Nanofluids Variable Properties on Natural Convection in Enclosures",International Journal of Thermal Sciences,Vol. 49, 2010, pp. 479 – 491,2010 [View] |
| 2010 | Khaled A. Alhazza, Ziyad N. Masoud,"A Novel Wave-Form Command-Shaping Control with Application on Overhead Cranes",2010 ASME Dynamic Systems and Control Conference,DSCC2010-4132,Cambridge, Massachusetts,2010 |
| 2010 | Eiyad Abu-Nada, Ziyad N. Masoud, Hakan Oztop, Antonio Campo,"Effect of Nanofluids Variable Properties on Natural Convection in Enclosures",International Journal of Thermal Sciences,2010 |
| 2009 | Ziyad N. Masoud, Khaled A. Alhazza, Majed A. Majeed, Eiyad A. Abu-Nada,"A Hybrid Command-Shaping Control System for Highly Accelerated Double-Pendulum Gantry Cranes",ASME 2009 International Design Engineering Technical Conferences ,2009 |
| 2009 | Ziyad N. Masoud, Khaled A. Alhazza, Majed A. Majeed, Eiyad A. Abu-Nada,"A Hybrid Command-Shaping Control System for Highly Accelerated Double-Pendulum Gantry Cranes",ASME 2009 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference,DETC2009-87501,San Diego, California,2009 |
| 2009 | Ziyad N. Masoud,"Effect of Hoisting Cable Elasticity on Anti-Sway Controllers of Quay-Side Container Cranes",Springer Link,2009 |
| 2009 | Ziyad Masoud,"Effect of Hoisting Cable Elasticity on Anti-Sway Controllers of Quay-Side Container Cranes,",Nonlinear Dynamics,Vol. 58, 2009, pp. 129 – 140. ,2009 [View] |
| 2008 | Ziyad N. Masoud,"Effect of Hoisting Cable Elasticity on the Oscillation Period of Quay-Side Container Cranes",49th AIAA/ASME/ASCE/AHS/ASC Structural Dynamics and Materials Conference,2008 |
| 2008 | Ziyad N. Masoud, Ali H. Nayfeh, Nader A. Nayfeh,"Sway Reduction on Quay-Side Container Cranes Using Delayed Feedback Controller: Simulations and Experiments",Journal of Vibration and Control,2008 |
| 2008 | Khaled A. Alhazza, Ziyad N. Masoud, Mohammed Alajmi,"Nonlinear Free Vibration Control of Beams Using Acceleration Delayed-Feedback Control",Journal of Smart Materials and Structures,Vol. 17, (2008) 015002,2008 [View] |
| 2008 | Eiyad Abu-Nada, Ziyad Masoud, Ala Hijazi,"Natural Convection Heat Transfer Enhancement in Horizontal Concentric Annuli Using Nanofluids",International Communications in Heat and Mass Transfer,Vol. 35, No. 5, 2008, pp. 657 – 665,2008 [View] |
| 2008 | Z. Masoud,"Effect of Hoisting Cable Elasticity on the Oscillation Period of Quay-Side Container Cranes",49th AIAA/ASME/ASCE/AHS/ASC Structural Dynamics and Materials Conference,AIAA paper no. 2008-2269,Schaumburg, Illinois,2008 |
| 2008 | Khaled A. Alhazza, Ziyad N. Masoud,"Nonlinear Free Vibration Control of Beams Using Acceleration Delayed-Feedback Control",Journal of Smart Materials and Structures,2008 |
| 2008 | Eiyad Abu-Nada, Ziyad N. Masoud, Ala Hijazi,"Natural Convection Heat Transfer Enhancement in Horizontal Concentric Annuli Using Nanofluids",International Communications in Heat and Mass Transfer,2008 |
| 2008 | Henry, R, Masoud, Z., Nayfeh, A, Mook, D.,"Cargo Pendulation Reduction on Ship-Mounted Cranes via Boom-Luff Angle Actuation",Journal of Vibration and Control,2008 |
| 2007 | Ziyad N. Masoud,"Oscillation Control of Quay-Side Container Cranes Using Cable Length Manipulation",ASME Journal of Dynamic Systems, Measurement and Control,Vol. 129, Issue 2, March 2007, pp. 224 – 228,2007 [View] |
| 2007 | Ziyad N. Masoud, Mohammed F. Daqaq,"A Graphical Design of an Input-Shaping Controller for Quay-Side Container Cranes with Large Hoist: Theory and Experiments",Jordan Journal of Mechanical and Industrial Engineering,Vol. 1, No. 1, 2007, pp. 57 – 67,2007 [View] |
| 2007 | Ziyad N. Masoud,"Oscillation Control of Quay-Side Container Cranes Using Cable Length Manipulation",ASME Journal of Dynamic Systems,2007 |
| 2007 | Ziyad N. Masoud, Mohammed F. Daqaq,"A Graphical Design of an Input-Shaping Controller for Quay-Side Container Cranes with Large Hoist: Theory and Experiments",Jordan Journal of Mechanical and Industrial Engineering,2007 |
| 2006 | Mohammed F. Daqaq, Ziyad N. Masoud,"Nonlinear Input-Shaping Controller for Quay-Side Container Cranes",Nonlinear Dynamics,Vol. 45, No. 1-2, 2006, pp. 149 – 170,2006 [View] |
| 2006 | Ziyad N. Masoud, Mohammed F. Daqaq,"A Graphical Approach to Input-Shaping Control Design for Container Cranes with Hoist",IEEE Transactions on Control Systems Technology,Vol. 14, Issue 6, 2006, pp. 1070 – 1077,2006 [View] |
| 2006 | Mohammed F. Daqaq , Ziyad N. Masoud,"Nonlinear Input-Shaping Controller for Quay-Side Container Cranes",Springer Link,2006 |
| 2006 | Ziyad N. Masoud, Mohammed F. Daqaq,"A Graphical Approach to Input-Shaping Control Design for Container Cranes with Hoist",IEEE,2006 |
| 2005 | Nader A. Nayfeh, Ziyad N. Masoud,"A Comparison of Three Feedback Controllers for Container Cranes",20th Biennial ASME Conference on Mechanical Vibration and Noise,2005 |
| 2005 | Ziyad N. Masoud, Ali H. Nayfeh, Nader A. Nayfeh,"Sway Reduction on Quay-Side Container Cranes Using Delayed Feedback Controller: Simulations and Experiments",Journal of Vibration and Control,Vol. 11, No. 8, 2005, pp. 1103 – 1122,2005 [View] |
| 2005 | Day, D. L., Grandrino, R., Nayfeh, A. H., Masoud, Z. N., Abdel-Rahman, E. H., McKinney, R. A.,"Overview of HiCASS Cargo Transfer Method",ASNE Joint Sea Basing Conference,Arlington, Virginia,2005 |
| 2005 | Mohammed F. Daqaq, Ziyad N. Masoud, Ali H. Nayfeh,"Nonlinear Modeling and Control of Quay-Side Container Cranes",IMAC XXIII,Paper No. 223,Orlando, Florida,2005 |
| 2005 | M. Daqaq, Z. Masoud,"A Graphical Phase Plane Approach for Controlling Cargo Transfer on Quay-Side Container Cranes with Hoisting",46th AIAA/ASME/ASCE/AHS/ASC Structural Dynamics and Materials Conference,AIAA paper no. 2005-1841,Austin, Texas,2005 |
| 2005 | Ziyad N. Masoud,"Differential Cable Length Manipulation for Oscillation Control of Quay-Side Container Cranes",20th Biennial ASME Conference on Mechanical Vibration and Noise,DETC2005-85320,Long Beach, California,2005 |
| 2005 | Nader A. Nayfeh, Ziyad N. Masoud, William Baumann,"A Comparison of Three Feedback Controllers for Container Cranes",20th Biennial ASME Conference on Mechanical Vibration and Noise,DETC2005-85235,Long Beach, California,2005 |
| 2005 | Day, D. L., Grandrino, R., Nayfeh, A. H., Masoud, Z. N., Abdel-Rahman, E. H., McKinney, R. A.,"Overview of HiCASS Cargo Transfer Method",ASNE Joint Sea Basing Conference,2005 |
| 2005 | Mohammed F. Daqaq , Ziyad N. Masoud, Ali H. Nayfeh,"Nonlinear Modeling and Control of Quay-Side Container Cranes",IMAC XXIII,2005 |
| 2005 | M. Daqaq , Ziyad N. Masoud,"A Graphical Phase Plane Approach for Controlling Cargo Transfer on Quay-Side Container Cranes with Hoisting",46th AIAA/ASME/ASCE/AHS/ASC Structural Dynamics and Materials Conference,2005 |
| 2005 | Ziyad N. Masoud,"Differential Cable Length Manipulation for Oscillation Control of Quay-Side Container Cranes",20th Biennial ASME Conference on Mechanical Vibration and Noise,2005 |
| 2004 | Z. N. Masoud,"Cargo Pendulation Reduction of Ship-Mounted Cranes,",Springer Link,2004 |
| 2004 | Ziyad N. Masoud, Mohammed F. Daqaq, Nader A. Nayfeh,"Pendulation Reduction on Small Ship-Mounted Telescopic Cranes",Journal of Vibration and Control,2004 |
| 2004 | Z. N. Masoud, A. H. Nayfeh, D. T. Mook,"Cargo Pendulation Reduction of Ship-Mounted Cranes",Nonlinear Dynamics,Vol. 35, No. 3, 2004, pp. 299 – 311,2004 [View] |
| 2004 | Ziyad N. Masoud, Mohammed F. Daqaq, Nader A. Nayfeh,"Pendulation Reduction on Small Ship-Mounted Telescopic Cranes",Journal of Vibration and Control,Vol. 10, No. 8, 2004, pp. 1167 – 1179,2004 [View] |
| 2003 | Ziyad N. Masoud, Nader A. Nayfeh,"Pendulation Reduction on Small Ship-Mounted Telescopic Cranes",44th AIAA/ASME/ASCE/AHS Structures, Structural Dynamics, and Materials Conference,AIAA paper no. 2003-1687,Norfolk, Virginia,2003 |
| 2003 | Ziyad N Masoud, Nader A. Nayfeh, Ali H. Nayfeh,"Sway Reduction on Container Cranes Using Delayed Feedback Controller: Simulations and Experiments",19th Biennial ASME Conference on Mechanical Vibrations and Noise,DETC2003/VIB-21601,Chicago, Illinois,2003 |
| 2003 | Ziyad N. Masoud, Ali H. Nayfeh, Amjed Al-Mousa,"Delayed Position-Feedback Controller for the Reduction of Payload Pendulations of Rotary Cranes",Journal of Vibration and Control,Vol. 9(1-2), 2003, pp. 257 – 277,2003 [View] |
| 2003 | Ziyad N. Masoud, Nader A. Nayfeh,"Pendulation Reduction on Small Ship-Mounted Telescopic Cranes",44th AIAA/ASME/ASCE/AHS Structures, Structural Dynamics, and Materials Conference,2003 |
| 2003 | Ziyad N. Masoud, Nader A. Nayfeh, Ali H. Nayfeh,"Sway Reduction on Container Cranes Using Delayed Feedback Controller: Simulations and Experiments",19th Biennial ASME Conference on Mechanical Vibrations and Noise,2003 |
| 2003 | E. M. Abdel-Rahman, A. H. Nayfeh, Z. N. Masoud,"Dynamics and Control of Cranes: A Review",Journal of Vibration and Control,Vol. 9, No. 7, 2003, pp. 863 – 908,2003 [View] |
| 2003 | Ziyad N. Masoud,"Delayed Position-Feedback Controller for the Reduction of Payload Pendulations of Rotary Cranes",Journal of Vibration and Control,2003 |
| 2003 | Z. N. Masoud, A. H. Nayfeh,"Sway Reduction on Container Cranes Using Delayed Feedback Controller",Nonlinear Dynamics,Vol. 34, No. 3-4, 2003, pp. 347 – 358,2003 [View] |
| 2003 | E. M. Abdel-Rahman, A. H. Nayfeh, Z. N. Masoud,"Dynamics and Control of Cranes: A Review",Journal of Vibration and Control,2003 |
| 2003 | Ziyad N. Masoud, A. H. Nayfeh,"Sway Reduction on Container Cranes Using Delayed Feedback Controller",Springer Link,2003 |
| 2002 | Ziyad N. Masoud, Ali H. Nayfeh,"Sway Reduction on Container Cranes Using Delayed Feedback Controller",43rd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference,43rd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, AIAA paper no. 2002-1279,2002 |
| 2002 | Nayfeh, A.H., Masoud, Z.,"A Supersmart Controller for Commercial Cranes",Newsletter, International Association for Structural Control,2002 |
| 2002 | Ziyad N. Masoud, Ali H. Nayfeh,"Sway Reduction on Container Cranes Using Delayed Feedback Controller",43rd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference,AIAA paper no. 2002-1279,Denver, Colorado,2002 |
| 2002 | Nayfeh, A.H., Masoud, Z.N.,"A Supersmart Controller for Commercial Cranes",Newsletter, International Association for Structural Control,Vol. 6, No. 2, 4-6, 2002,2002 |
| 2001 | Henry, R., Masoud, Z., Nayfeh, A., Mook, D.,"Cargo Pendulation Reduction on Ship-Mounted Cranes via Boom-Luff Angle Actuation",Journal of Vibration and Control,Vol. 7, No. 8, 2001, pp. 1253 – 1264. ,2001 [View] |
| 2001 | Ali H. Nayfeh ,"Delayed Position-Feedback Controller for the Reduction of Payload Pendulation of Rotary Cranes",18th Biennial ASME Conference on Mechanical Vibrations and Noise,2001 |
| 2001 | Ali H. Nayfeh, Ziyad N Masoud,"Delayed Position-Feedback Controller for the Reduction of Payload Pendulation of Rotary Cranes",18th Biennial ASME Conference on Mechanical Vibrations and Noise,DETC2001/VIB-21601,Pittsburgh, Pennsylvania,2001 |
| 2000 | Z. N. Masoud, A. Nayfeh, R. Henry, D. Mook,"Cargo Pendulation Reduction on Ship-Mounted Cranes via Boom-Luff and Slew Angles Actuation",41st AIAA Structures, Structural Dynamics, and Materials Conference,2000 |
| 2000 | Z. Masoud, A. Nayfeh, R. Henry, D. Mook,"Cargo Pendulation Reduction on Ship-Mounted Cranes via Boom-Luff and Slew Angles Actuation",41st AIAA Structures, Structural Dynamics, and Materials Conference,AIAA paper no. 2000-1543,Atlanta, Georgia,2000 |